psithemius/firmware/README.md

Pocket Psithemius

Firmware for the Pocket Psithemius device.

Installation

• Set up an Arduino as ISP programmer following this tutorial or use any other ICSP compatible programmer.
• The firmware depends on the OneButton library which you need to install with the IDE's Library Manager
• Connect the Pocket Psithemius via ICSP to the programmer.

IDE Tools Settings

• Board: Attiny24/44/84
• Chip: Attiny84
• Clock: 8MHz (internal)
• B.O.D. Level: B.O.D. Disabled
• Save EEPROM: EEPROM retained
• Pin Mapping: clockwise
• LTO: Enabled
• millis()/micros(): Enabled