| .. | ||
| pocketpsithemius .ino.bak | ||
| pocketpsithemius.ino | ||
| README.md | ||
Pocket Psithemius
Firmware for the Pocket Psithemius device.
Installation
- Set up an Arduino as ISP programmer following this tutorial or use any other ICSP compatible programmer.
- The firmware depends on the OneButton library which you need to install with the IDE's Library Manager
- Connect the Pocket Psithemius via ICSP to the programmer.
IDE Tools Settings
- Board: Attiny24/44/84
- Chip: Attiny84
- Clock: 8MHz (internal)
- B.O.D. Level: B.O.D. Disabled
- Save EEPROM: EEPROM retained
- Pin Mapping: clockwise
- LTO: Enabled
- millis()/micros(): Enabled