randogoth/psithemius
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

SW4 is S1

Browse source
This commit is contained in:
sublunarspace 2020-06-29 10:50:18 +02:00
parent df15ffe92d
commit b2e960cb05
2 changed files with 2 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

2
hardware/ASSEMBLY.md
View file

@ -55,7 +55,7 @@ Now, identify the four different ICs and stick them into their footprints from t
## 4. Power Switch & Special Resistors
Now proceed with the 6 legged power switch SW4 . Make sure the switch points outward away from the PCB disk. Do the same with the three legged variable resistor VR1.
Now proceed with the 6 legged power switch S1 . Make sure the switch points outward away from the PCB disk. Do the same with the three legged variable resistor VR1.
Now solder the wire wound resistor R16. It's a bit tricky to get it solidly fixed due to the thick leads and large through-holes. Use more solder than with the other parts. Clip of the excess leads when cooled down.